Zeiss Inspect 2024 – Your Complete Beginner's Guide

What you'll learn
You will learn how to confidently navigate the user interface of ZEISS Inspect.
You will learn how to import files and create a pre-alignment.
You will learn how to select areas and create a local best-fit.
You will learn how to generate a surface comparison and set deviation flags.
You will learn how to create nominal and actual elements and assign measurement principles.
You will learn how to perform distance and diameter inspections.
You will learn how to conduct cross-section inspections.
You will learn how to create meaningful measurement reports.
Requirements
No prior experience with the software is necessary – you'll learn everything just by watching the course!
Description
In this course, you will receive a comprehensive introduction to using the ZEISS INSPECT 3D software. This course is designed for beginners who want to learn the fundamentals of 3D metrology and efficiently integrate the software into their workflow.At the start, you will become familiar with the user interface and the basic functionalities of the software, such as importing CAD and mesh data, using selection tools, and applying the Local Best-Fit method. These initial steps will enable you to perform simple inspections, such as surface comparisons and cross-section analyses, to quickly identify deviations.In the next section, you will dive into more complex inspections, including diameter checks, distance measurements, and angle analyses. You will also learn how to perform precise measurements even without CAD data and create step projects to ensure the highest accuracy in your analyses.The course also covers 2D inspections, teaching you how to generate cross-sections and construct 2D elements commonly used in metrology. An additional focus is placed on form and positional tolerances, where you will measure tolerances and apply reference systems for precise measurements.Finally, you will learn how to properly document your measurement results and present them in a structured inspection report. This course provides you with a practical foundation to confidently and efficiently use ZEISS INSPECT Optical 3D while advancing your skills in 3D metrology.
Overview
Section 1: Introduction
Lecture 1 Welcome!
Lecture 2 Training Materials
Section 2: First Steps in the Software
Lecture 3 User Interface
Lecture 4 Import of CAD and Mesh-Data
Lecture 5 Selection Tools
Lecture 6 Local Best-Fit
Section 3: Simple Inspections
Lecture 7 Surface Comparison
Lecture 8 Inspection Sections
Lecture 9 Deviation Labels
Section 4: Complex Inspections
Lecture 10 Nominal Elements, Actual Elements and Measurement Principles
Lecture 11 Inspection of Diameters
Lecture 12 Inspection of Distances
Lecture 13 Inspection of Cylinder Distances
Lecture 14 Inspection of Angles
Lecture 15 Inspections without CAD
Lecture 16 Stage Projects
Section 5: 2D Inspection
Lecture 17 Create Sections
Lecture 18 Construction and Inspection of 2D Elements
Section 6: GD&T Inspections
Lecture 19 Form Tolerances
Lecture 20 Datum Systems
Lecture 21 Position Tolerances
Section 7: Reporting
Lecture 22 Create a Measurement Report
Measurement Technicians,Engineers,Students

Homepage

https://www.udemy.com/course/zeiss-inspect-training-beginners/