Udemy – Hands On Ccna Cisco Packet Tracer Routers, Switches 100% Lab

What you'll learn
IP Addressing /(Public, Private Networks) /Subnetting/ (TCP,UDP Ports)
What's The Purpose Of A Router And A Switch and Why Need It.
Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.
Setting Direct and Remote (Telnet,SSH) Connections To The Router.
Configuring IP Address/Description/Duplex/Speed To Interfaces.
Basic To Advanced Router CLI. (Learn CLI From Zero To Hero).
How To Break(Hack) Into The Router And A Switch.
Backup And Restore Router /Switch Config and IOS To And From A TFTP Server.
Setup A Banner For The Router And A Switch
What is A MAC Address Table And A Routing Table.
What Is an NTP Server.
What Is AAA.
How To Configure And Manage DHCP Server On A Router
What is A DHCP Relay and How It Works
When Do You Need DHCP Snooping.
NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).
How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)
How Can We Provide Fault Tolerance For A Router (HSRP).
Understanding Of The TCP/IP Classes (Private And Public Networks).
How To Configure And Manage A Cisco Switch For Direct And Remote (Telnet,SSH) Connections.
How To Secure The Switch Using Port Security
What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).
When Do I need VTP and Its Importance on Large Scale Network.
What is an EtherChannel and Its Types (LACP,PAGP).
What is Trunking and Its Purpose On The Switch
What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).
What is The Difference between a Switch and a Hub.
TCP/IP Addressing And Subnetting.
What Are Switch Loops And How To Prevent Them Using STP/RSTP.
How To Configure Routing Between Different Sites
Configure Static Routing / Floating Routes And Default Routes
What is The Difference between Dynamic and Static Routing and When To Use.
Configure Dynamic Routing Protocols (RIP,OSPF,EIGRP) For IPV4 and IPV6.
What Is The Wild Card Mask and Why Important For Some Routing Protocols.
How Can We Provide Fault Tolerance For Routing Protocols.
How To Configure And Manage DHCP Server On A Router For IPV4 And IPV6.
NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).
Requirements
To Perform All The Labs that i am doing so You would have the actual understanding of How It Works.
Anyone that want to put at least 20 Hours of their Life to learn, enhance and sharpen There Network Skills Using The CLI
A Basic Computer Just To Install Cisco Packet Tracer.
Description
About This Class ( My Entire Course is 100% HANDS ON)If you want to jumpstart your career in IT and networking by acing The CLI For Configuring Cisco Switches/Routers Than This Course Is For You. I will walk you step by step on how to configure routers and switches from scratch but of course first you need to know the purpose of Network Devices and you will learn how to create your own network from scratch by building custom topologies for different organizations.This is the one course you need Master The CLI. 100% Full lab Simulation is Covered so you'll get the hands-on practical skills as you are working on real world networks.Why This ClassThis Short Course Will be the same as You worked as a Junior Network Engineer For a Company For at least 2 Years. This Class Will be The same as You were Setting Up Cisco Routers And Switches In a Real Environment.What Will You Gain From This ClassThis course will teach you and enhance your skills in better understating by actually doing it as we were in the same classroom utilizing Cisco Routers And Switches using Cisco Packet Tracer.In This Course you will not just learn you will actually do it yourself as if you were in an actual company and here are the key topics that you will gain from this class.1) IP Addressing /(Public, Private Networks) /Subnetting/ (TCP,UDP Ports)2) What's The Purpose Of A Router And A Switch and Why Need It.3) Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.4) Setting Direct and Remote (Telnet,SSH) Connections To The Router.5) Configuring IP Address/Description/Duplex/Speed To Interfaces.6) Basic To Advanced Router CLI. (Learn CLI From Zero To Hero).7) How To Break(Hack) Into The Router And A Switch.8) Backup And Restore Router /Switch Config and IOS To And From A TFTP Server.9) Setup A Banner For The Router And A Switch10) What is A MAC Address Table And A Routing Table.11) What Is an NTP Server.12) What Is AAA.13) How To Configure And Manage DHCP Server On A Router14) What is A DHCP Relay and How It Works15) When Do You Need DHCP Snooping.16) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).17) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)18) How Can We Provide Fault Tolerance For A Router (HSRP).19) Understanding Of The TCP/IP Classes (Private And Public Networks).20) How To Configure And Manage A Cisco Switch For Direct And Remote (Telnet,SSH) Connections.21) How To Secure The Switch Using Port Security22) What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).23) When Do I need VTP and Its Importance on Large Scale Network.24) What is an EtherChannel and Its Types (LACP,PAGP).25) What is Trunking and Its Purpose On The Switch26) What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).27) What is The Difference between a Switch and a Hub.28) TCP/IP Addressing And Subnetting.29) What Are Switch Loops And How To Prevent Them Using STP/RSTP.30) How To Configure Routing Between Different Sites31) Configure Static Routing / Floating Routes And Default Routes32) What is The Difference between Dynamic and Static Routing and When To Use.33) Configure Dynamic Routing Protocols (RIP,OSPF,EIGRP) For IPV4 and IPV6.34) What Is The Wild Card Mask and Why Important For Some Routing Protocols.35) How Can We Provide Fault Tolerance For Routing Protocols.36) What Is TCP/IP And Its Classes 37) What's The Difference Between Classful and Classless Networks 38) Learn Subnetting. ( The easiest way you will ever see)39) How To Secure Routing Protocol.40) How To Configure And Manage DHCP Server On A Router For IPV4 And IPV6.41) What is A DHCP Relay and How It Works42) When Do You Need DHCP Snooping.43) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).44) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)45) How Can We Provide Fault Tolerance For A Router (HSRP).46) Understanding Of The TCP/IP Classes (Private And Public Networks).Who is This Class For 1) Network Engineers /System Administrators.2) IT Support Techs.3) Help Desk Analyst.4) Any One Who wants to get themselves in The IT Field.Facts About The CourseDo I need any Work experience?If You or Don't Work In The IT Field You Should Be Fine Taking This Course.I Already Work In The IT Field Will I Benefit From This Course?Working In The IT Field Doesn't Mean You Will Cover All Concepts Of Networking.Will I get a certificate of completion at the end?Yes You Will.
Overview
Section 1: Introduction To Entire Course
Lecture 1 Introduction To Course Setup
Section 2: Setup Your Environment For Lab (Cisco Packet Tracer).
Lecture 2 Download And Install Cisco Packet Tracer.
Section 3: Routers Hubs Switches, L3 Switches Broadcast/Collision Domains And Cable Types.
Lecture 3 How Do Hubs And Switches Operate.
Lecture 4 A Switch Or A Multilayer Switch.
Lecture 5 What Is The Purpose Of A Router And Switch.
Lecture 6 What Type Of Cables Are Out There.
Lecture 7 What Is The Difference Between A Broadcast And Collision Domain.
Section 4: TCP/IP Addressing And Ports. (Classful Networks).
Lecture 8 Overview Of All TCP/IP Classes and How Binary and Decimal Work (Part1).
Lecture 9 Overview Of All TCP/IP Classes and How Binary and Decimal Work (Part2).
Lecture 10 Class C
Lecture 11 Class B
Lecture 12 Class A
Lecture 13 Classes D And E
Lecture 14 The Difference Between TCP And UDP Ports. (Part1)
Lecture 15 The Difference Between TCP And UDP Ports. (Part2)
Section 5: Cisco Router Basic Commands (Learning The CLI From Scratch).
Lecture 16 Routers Mode (User,Privilage,GlobalConfig,Interface,Subinterface and Line).
Lecture 17 Change The Hostname and Change Date, Time and The Time Zone.
Lecture 18 Change The History Size and Display The History.
Lecture 19 Difference Between The Enable Password and Enable Secret And How To Set Them Up
Lecture 20 Storage Types Of The Router.(RAM,NVRAM,FLASH).
Lecture 21 Interface Config (IP Address,Description,Duplex,Speed)
Lecture 22 Setup A Time Server (NTP).
Lecture 23 Disable IP Domain Lookup, Name Server, Domain Name.
Lecture 24 Configure The Console Line (Direct Connection).
Lecture 25 Configure The VTY Line (Remote Connection Telnet)
Lecture 26 Configure Usernames For Console and Telnet.
Lecture 27 How To Encrypt The Passwords.
Lecture 28 Configure The VTY Line (Remote Connection SSH)
Lecture 29 Setup A Banner For The Router.
Section 6: Cisco Switch Basic Commands (Learning The CLI From Scratch).
Lecture 30 Hostname, Enable Secret, Date Time, History Size And Disable IP Domain Lookup
Lecture 31 Interface Config (Duplex,Speed,Description,Display And Shut Down Ports).
Lecture 32 The MAC Address Table
Lecture 33 Storage Types Of The Switch.(RAM,NVRAM,FLASH)
Lecture 34 Configure The Console Line (Direct Connection).
Lecture 35 Configure The VTY Line (Remote Connection Telnet)
Lecture 36 Configure Usernames For Console and Telnet.
Lecture 37 Configure The VTY Line (Remote Connection SSH)
Lecture 38 Setup A Banner For The Switch.
Section 7: Centralize Management And Maintaining Of Routers And Switches.
Lecture 39 TACACS+ Configuration.
Lecture 40 Backup The Router And The Switch Config and IOS To A TFTP Server.
Lecture 41 Restore The Router And The Switch Config From TFTP Server.
Lecture 42 Breaking Into The Router And The Switch.
Section 8: How Does An IPV6 Look Like and What Do I understand from it.
Lecture 43 Binary,Decimal,Hexadecimal
Lecture 44 IPV6 And How to Simplify And Follow The Rules
Section 9: All Types Of IPV6
Lecture 45 Global Unicast
Lecture 46 Unique (Site) Local.
Lecture 47 Link Local
Lecture 48 Multicast
Lecture 49 AnyCast
Lecture 50 LoopBack
Lecture 51 Working With Static IPV6 Part1
Lecture 52 Working With Static IPV6 Part2
Section 10: Subnetting TCP/IP Classes (Classless Network) (VLSM) Variable Length Subnet Mask
Lecture 53 Subnetting a Class C Network. (Part1)
Lecture 54 Subnetting a Class C Network.(Part2)
Lecture 55 Reverse Engineering Subnetting For Class C.
Lecture 56 Subnetting a Class B Network. (Part1)
Lecture 57 Subnetting a Class B Network. (Part2)
Lecture 58 Reverse Engineering Subnetting For Class B.
Lecture 59 Subnetting a Class A Network. (Part1)
Lecture 60 Subnetting a Class A Network. (Part2)
Lecture 61 Reverse Engineering Subnetting For Class A.
Section 11: Securing Switch Ports Using Port Security.
Lecture 62 Switch Ports Without Port Security
Lecture 63 Switch Ports Using Port Security Part1
Lecture 64 Switch Ports Using Port Security Part2
Lecture 65 Switch Ports Using Port Security Part3
Lecture 66 Switch Ports Using Port Security Part4
Lecture 67 Switch Ports MAC Address Table
Section 12: Segmenting The Network Using VLANs.
Lecture 68 Switches Without VLANS.
Lecture 69 Switches With VLANs Part1.
Lecture 70 Switches With VLANs Part2.
Lecture 71 Switches With VLANs Part3.
Lecture 72 Switches With VLANs Part4.
Lecture 73 Routing Between Different VLANS Using A Router (Router On A Stick). Part1
Lecture 74 Routing Between Different VLANS Using A Router (Router On A Stick). Part2
Lecture 75 Routing Between Different VLANS Using A Router (Router On A Stick). Part3
Lecture 76 Routing Between Different VLANS Using A Multilayer Switch. Part1
Lecture 77 Routing Between Different VLANS Using A Multilayer Switch. Part2
Section 13: VTP And Its Relation To VLANs.
Lecture 78 VTP Types (Client,Server,Transparent). Part1
Lecture 79 VTP Types (Client,Server,Transparent). Part2
Lecture 80 VTP Types (Client,Server,Transparent). Part3
Section 14: Preventing Switch Loops Using STP/RSTP.
Lecture 81 STP
Lecture 82 RSTP
Section 15: Fault Tolerance For Cables (EtherChannel) Using LACP/PAGP.
Lecture 83 LACP
Lecture 84 PAGP
Section 16: Routing (Static,Default,Dynamic Using RIP,OSPF,EIGRP).
Lecture 85 Working With One Router (Default Routing).
Lecture 86 Two Routers (Static Routing). (2 Sites For Same Company).
Lecture 87 Three Routers (Static /Default). (3 Sites For Same Company).
Lecture 88 Five Routers (Static/Floating). (5 Sites For Same Company). Part1
Lecture 89 Five Routers (Static/Floating). (5 Sites For Same Company). Part2
Lecture 90 Setting UP RIPV1
Lecture 91 Setting UP RIPV2
Lecture 92 Setting UP OSPF Lab1
Lecture 93 Setting UP OSPF Lab2
Lecture 94 Setting UP OSPF Lab3
Lecture 95 Setting UP OSPF Lab4
Lecture 96 Setting UP OSPF Lab5.
Lecture 97 Setting UP OSPF Lab6.
Lecture 98 Setting UP OSPF Lab7.
Lecture 99 Setting UP EIGRP Lab1.
Lecture 100 Setting UP EIGRP Lab2.
Lecture 101 Setting UP EIGRP Lab3.
Lecture 102 Static Routing IPV6
Lecture 103 Dynamic Routing RIPNG
Lecture 104 Dynamic Routing OSPF
Lecture 105 Dynamic Routing EIGRP
Section 17: Setting Up A DHCP Server.
Lecture 106 Setup DHCP On A Router For One Broadcast (One Network).
Lecture 107 Setup DHCP On A Router For Two Broadcast (Two Networks).
Lecture 108 Setup A DHCP Relay And What Its Purpose.
Lecture 109 Setup DHCP On One Server.
Lecture 110 Setup DHCP On Multiple Servers.
Lecture 111 What Is DHCP Snooping And How Does It Work.
Lecture 112 Setup DHCP For Multiple VLANs.
Lecture 113 Setting Up A Server As A DHCPv6 For One Network
Lecture 114 Setting Up A Server As A DHCPv6 For Multiple Networks.
Lecture 115 Setting Up A Router As A DHCPv6 For One Network
Lecture 116 Setting Up A Router As A DHCPv6 For Multiple Networks
Section 18: Fault Tolerance For The Router (HSRP,VRRP,GLBP).
Lecture 117 A Typical Topology Without Fault Tolerance. (One Router).
Lecture 118 A Topology With Fault Tolerance (Two Routers).
Lecture 119 A Topology With Fault Tolerance (Two Routers Using HSRP) Part1
Lecture 120 A Topology With Fault Tolerance (Two Routers Using HSRP) Part2
Section 19: Making Your Router As A Firewall (Access Lists)
Lecture 121 Access List Types (Standard,Extended,Named) And The Rules.
Lecture 122 Standard Access List Part1
Lecture 123 Standard Access List Part2
Lecture 124 Standard Access List Part3
Lecture 125 Standard Access List Part4
Lecture 126 Extended Access List Part1
Lecture 127 Extended Access List Part2
Lecture 128 Extended Access List Part3
Lecture 129 Extended Access List Part4
Lecture 130 Named Access List
Section 20: NAT (Static NAT, Dynamic NAT,PAT).
Lecture 131 What Is a Public And Private Network.
Lecture 132 Static NAT
Lecture 133 Dynamic NAT
Lecture 134 PAT
Section 21: WIFI Networks
Lecture 135 WIFI Part1
Lecture 136 WIFI Part2
Section 22: Final Conclusion
Lecture 137 In A NutShell
To Become a Successful Network Engineer,To Enter The IT Field With Real World Experience,To Feel Confidence About Your IT Skills.,To Pass The CCNA Cert

Homepage

https://www.udemy.com/course/hands-on-ccna-cisco-packet-tracer-routers-switches-100-lab/